Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
- 4. Engines
4.1. Petrol engines
- 4.2. The diesel engine
- 4.2.1. Technical characteristics
4.2.1.1. The block of cylinders
4.2.1.2. The Krivoshipno-shatunnyj mechanism
4.2.1.3. Greasing system
4.2.1.4. Fuel system
4.2.1.5. The tightening moments
4.2.2. Check and adjustment of backlashes of valves
4.2.3. Fuel system
4.2.4. Atomizers
4.2.5. Candles накаливания
4.2.6. Compression check
4.2.7. Removal of air from fuel system
4.2.8. The fuel filter
4.2.9. The fuel pump, installation of the beginning of injection of fuel
4.2.10. Adjustment of number of turns of idling
4.2.11. The repair which is not demanding removal of the engine
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment
|
The pig-iron block of cylinders has the cylinders executed directly in its material. Has five nests of radical bearings of a cranked shaft and three nests of bearings of a cam-shaft.
| Diameter of cylinders: |
| – The nominal: |
| • group And |
94,000 – 94,015 mm
|
| • group In |
94,015 – 94,030 mm
|
| – 1st repair size: |
| • group With |
94,200 – 94,215 mm;
|
| • group D |
94,215 – 94.230 mm
|
| – 2nd repair size: |
| • group E |
94,400 – 94,415 mm
|
| • group F |
94,415 – 94,430 mm
|
| – 3rd repair size: |
| • group G |
94,600 – 94,615 mm
|
| • group N |
94,615 – 94,630 mm
|
| Diameters of apertures of nests of directing pushers of valves: |
| – The nominal size |
24,00 – 24,03 mm
|
| – The repair size |
24,20 – 24,23 mm
|
|
|